Question on EVM of ADS62p24 and TSW1200

JIN LI

Other Parts Discussed in Thread: ADS62P24

I am using EVM of ADS62p24 and TSW1200 EVM to capture 2 channels of input signals to ADS62p24. But it seems I can not capture 2 channels simultaneously by using the GUI software for TSW1200 provided by TI.

Is there any way (configuration/software) I can use to capture the data of 2 channels simultaneously by using these two EVMs?

Thanks,

Jin

over 13 years ago

0 Kang Hsia over 13 years ago

TI__Guru 70144 points

Hi Jin Li,

You can refer to the post below for more detail on the simultaneous capture of ADCs

http://e2e.ti.com/support/data_converters/high_speed_data_converters/w/design_notes/how-to-capture-all-channels-of-ads62xx-or-ads64xx-serial-lvds-using-tsw1200.aspx

This post also applies to the ADS62Pxx family of ADCs.

-KH

0 JIN LI over 13 years ago in reply to Kang Hsia

Prodigy 90 points

Hi Kang,

Thanks a lot for your helpful information. I will study the post and try it.

Jin

Data converters

Data converters forum

Question on EVM of ADS62p24 and TSW1200