• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 46 subscribers
  • Views 185 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

AMC1306M25: aging degradation of offset error

Noriyuki Takahashi
Genius 9850 points
Part Number: AMC1306M25
Other Parts Discussed in Thread: AMC1350,

Hi team,

Customer wants to know whether the offset error can have aging degradation. They need to know the offset error(+/-100uV min/max) can be increased in two or three times by aging.

Are there any data that can prove that the the offset error can be affected by agigng or can not be affected? 

Regards,

Noriyuki Takahashi

  • +1
    TI__Mastermind 49371 points

    Hi Takahashi-san,

    We have begun specifying this on our newer devices such as the AMC1350. Drift due to again is below measurement capability and therefor specified as typical 0mV. 

    (7) Value is below measurement capability

    We do not have this data for the AMC1306M25 specifically, but the front end stages are built on the same process and we expect the same negligible drift over lifetime.