This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

AMC1210: AMC1210 replacement

Part Number: AMC1210
Other Parts Discussed in Thread: AMC1301, AMC131M03, AMC1300

Any body can suggest a replacement for this AMC1210? Currently its not  available.

  • Hi, 

    We do not have another direct replacement for the AMC1210 available. 

  • If there is no replacement for the AMC1210 in my shunt current measurement application for an AC servo motor, could you please provide advice on any of the options mentioned below?

    1. I am specifically looking for a component that performs the same function of AMC1210 for reading ADC values from AMC1304 to a MUP, but without the need of firmware required chips like  microcontrollers or FPGA.?

    2. Could you recommend an alternative ADC to the AMC1304 that offers a direct interface such as SPI, I2C, or UART for transmitting ADC values to a MUP, without the necessity of using microcontrollers or  modulator Filters?

    3. What is your opinion on utilizing the AMC1301 as a replacement for the combination of AMC1304 and AMC1210 in my application?

  • Hi,

    1. Not sure of a device that can perform this function from TI. 

    2. AMC131M03, isolated data converter with integrated DC/DC converter and SPI output. 

    3. I would suggest AMC1300 over AMC1301 as it is a newer design. Isolated amplifiers have less flexibility but are very popular due to their ease of use. Please see this document for additional details. https://www.ti.com/lit/wp/sbaa359a/sbaa359a.pdf?ts=1695046864182

    Please let me know what you think of these options and if you have additional questions.