AMC3336-Q1: How to safely trig the DIAG output pin, for test purposes

TISL

Part Number: AMC3336-Q1
Other Parts Discussed in Thread: AMC3336

Dear E2E support,

Is there any way to act "voluntarily" on our AMC3336, to test the DIAG pin? (acting on the HLDOUT IN or OUT, or forcing the data to not be received, etc...?)

Regards,

10 months ago

+1 Alexander Smith 10 months ago

TI__Mastermind 49691 points

Hi,

Yes, shorting the high side supply Pin 5 HLDO_OUT to Pin 8 HGND should cause DIAG to trigger.

Data converters

Data converters forum

AMC3336-Q1: How to safely trig the DIAG output pin, for test purposes