Hi, Support Team
We will use ADS7142-Q1 as below chart, about schematic have any concern?
if any suggestion, Please advise me.
Thanks,
Best regards,
Lawrence
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hi, Support Team
We will use ADS7142-Q1 as below chart, about schematic have any concern?
if any suggestion, Please advise me.
Thanks,
Best regards,
Lawrence
Hi Lawrence,
Pull-up on the I2C lines are required, OPA drivers for the ADC input may be necessary, otherwise everything looks OK.