ADS8513: ADS8513 QSPI PROTOCOL

TCE IK

Part Number: ADS8513

In the datasheet, it says "Figure 50 shows a simple interface between the ADS8513 and any QSPI-equipped microcontroller". Can I use SPI instead of QSPI?"

over 1 year ago

0 TCE IK over 1 year ago

Prodigy 40 points

There is no QSPI protocol in my microcontroller.(stm32f411)

0 Ryan Andrews over 1 year ago in reply to TCE IK

TI__Guru 64196 points

Hello - Please refer to the "SPI Interface" section on page 27. You may be able to modify one of the suggested interface configurations in Figure 50 and 51 to support SPI.

Regards,

Ryan

Data converters

Data converters forum

ADS8513: ADS8513 QSPI PROTOCOL