• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 46 subscribers
  • Views 216 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

ADC34J45: About connection between Analog and Digital ground.

Pedro Luis Diaz Herce
Prodigy 180 points
Part Number: ADC34J45

Tool/software:

Hello,

The ADC34J45 converter only has a pin of ground , which is thermal pad, too.

My question is how the connection between digital and analog ground can be performed in this ADC. 

JESD signal from microprocessor are referred to GND digital but the analog input signals are referred to analog ground, but only a pin of ground is available for this ADC converter. 

Please, could you indicate us how we should connect the analog and digital ground in this part?

Thanks in advance.

Best Regards,

Pedro