• State Resolved
  • Locked Locked
  • Replies 5 replies
  • Subscribers 46 subscribers
  • Views 127 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

ADS114S08: Automotive grade

Leonardo Falanga
Prodigy 10 points
Part Number: ADS114S08
Other Parts Discussed in Thread: ADS1120-Q1, ADS1148-Q1, ADS1261-Q1, ADS1018-Q1, LMP90080-Q1

Tool/software:

Hi,
I need to know if this ADC ADS114S0x Low-Power, Low-Noise, Highly Integrated, 6- and 12-Channel, 4-kSPS, 16-Bit, Delta-Sigma ADC with PGA and Voltage Reference

has an automotive certified version or a family with exactly the same specifications in terms of number of channels, D & SE, number of bits etc.


Is it possible to find a similar one or are you planning to certify it?

Thanks in advance

  • 0
    TI__Mastermind 40661 points

    Hi Leonardo Falanga,

    The ADS114S08 is not Q1 qualified, and we currently have no plans to qualify it

    However, there is an ADS1148-Q1, which is the previous generation of the ADS114S08. We also have the ADS1120-Q1, which is a lower cost, lower channel count device similar to the ADS114S08

    Finally, we have the ADS1261-Q1, which is a higher performance 24-bit device compared to ADS114S08.

    Let me know if any of these devices could meet your requirements. It might also help to know what you are trying to do with the ADC, as we have other ADCs that could be more suitable (I only mentioned those ADCs that are similar to ADS114S08)

    -Bryan

  • 0 in reply to Bryan Lizon86
    Prodigy 10 points

    Dear Bryan,

    Thank you very much for the quick response.
    I thank you for the suggestions.
    I had also identified the ADS1148-Q1 because is SPI, automotive, 8 channels and 16 bps resolution.
    I am trying to acquire different values from sensors such as thermocouples, accelerometers, strain gauges that have automotive qualification.

    As you can well understand I have both purely differential and single-ended channel requirements.
    I have also identified the LMP90080-Q1 and the ADS1018-Q1 (but too few channels).
    I have a need to use a few ADCs with the maximum n. of channels to get the job done.

  • 0 in reply to Leonardo Falanga
    TI__Mastermind 40661 points

    Hi Leonardo Falanga,

    Sounds good - do you need any additional support from us? Any additional questions about these devices?

    -Bryan

  • 0 in reply to Bryan Lizon86
    Prodigy 10 points

    I will talk with the company and update u :) thx for the moment.

  • 0 in reply to Leonardo Falanga
    TI__Mastermind 40661 points

    Hi Leonardo Falanga,

    Understood, I'll mark this as resolved for now, you can always respond back if you have more questions, or start a new thread

    -Bryan