DAC37J84EVM: Need to work TSW14J10 with ZCU102.

Erivelton Castro

Prodigy 150 points

Part Number: DAC37J84EVM
Other Parts Discussed in Thread: DAC37J84

Tool/software:

Hi Dear,

Will I need to TSW14J10 interface board to work with the DAC37J84EVM connected on ZCU102?

Regards,

Erivelton Castro

1 month ago

+1 Kang Hsia 1 month ago

TI__Guru 70144 points

Hi,

You should be able to use the DAC37J84 EVM with ZCU102 with TI's JESD024C IP

https://www.ti.com/tool/TI-JESD204-IP

You may request the IP to take a look

-Kang

0 Erivelton Castro 1 month ago in reply to Kang Hsia

Prodigy 150 points

Hello,

Thank you for reference design, but about the hardware. Will I need the TSW14J10 for interface card between DAC37J84EVM with on ZCU102 or will not need? If I design my RT/HDL design will be to need the TSW14J10?

Regards,

Erivelton Castro

0 Rob Reeder 1 month ago in reply to Erivelton Castro

TI__Mastermind 24950 points

Hi Erivelton,

You will not need to use the TSW14J10 in-between the DAC EVM and the ZCU dev kit.

Regards,

Rob

0 Erivelton Castro 1 month ago in reply to Rob Reeder

Prodigy 150 points

Thank you.

Regards,

Erivelton Castro

Data converters

Data converters forum

DAC37J84EVM: Need to work TSW14J10 with ZCU102.