Because of the Thanksgiving holiday in the U.S., TI E2E™ design support forum responses may be delayed from November 25 through December 2. Thank you for your patience.

  • State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 46 subscribers
  • Views 85 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

AFE1594EVM: Question regard EVM

Ohad Fundoianu
Intellectual 320 points
Part Number: AFE1594EVM

Tool/software:

Hello, 

1. I have received the AFE1594EVM board and found that some of the components existed in the electrical scheme are not on the board mismatch between components with the same reference designator. 

For example, J8, J7  - have 18 pins on the board (2x9) while 24 pins (2x12) on scheme. 

2. What does the BPS_VREF (VREF Generation) is used for ? It look it goes straight to connector. 

3. What shall these connectors be connected to : 

Where do these voltages come from ? 

4. Not clear where exactly the leads are connected ? 

Ohad