• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 46 subscribers
  • Views 108 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TI-JESD204-IP: loopback test

HIDEHARU KONDO
Prodigy 130 points
Part Number: TI-JESD204-IP

Tool/software:

Is it necessary to use the Whizz Systems XM107 FMC loopback test card to perform loopback testing on the reference design?

I don't have a Whizz Systems XM107 FMC loopback test card, so please let me know if there is a way to run a loopback test using only the ZCU102 FPGA evaluation board.

  • 0
    TI__Mastermind 21255 points

    Hello Hideharu,

    Yes, you can implement loop back by directly connecting the TX transceivers to the RX transceivers in block design. Using the whizz card is what we recommend for testing a hardware loopback configuration.

    Thanks, Chase