ADC32RF55: Initial Device Configuration After Power-Up

Shunya Matsushima

Prodigy 70 points

Part Number: ADC32RF55

Tool/software:

I am currently configuring the "8.3.1 Initial Device Configuration After Power-Up".

Since I anticipate having several questions in the future, I have created this thread.

I'm sorry for the simple question.

Table 8-5.

Regarding the 12th data, the address is listed as 0x7B/8B. Should it be set to both addresses?

11 months ago

0 Chase W 11 months ago

TI__Mastermind 23760 points

Hi Shunya,

Yes, 0x7B refers to channel AIN1/2 while 0x8B is for inputs BIN1/2. I am going to close this post and send you an email so we can have this discussion over email. Please be on the lookout and check spam folders.

Thanks, Chase

0 Chase W 11 months ago in reply to Chase W

TI__Mastermind 23760 points

Hi Shunya,

File share service is still down. Please find mentioned files here:

ADC3xRF5x_API_v0p1p17.zip

Thanks, Chase

Data converters

Data converters forum

ADC32RF55: Initial Device Configuration After Power-Up