• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 46 subscribers
  • Views 219 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

AMC1336: AMC3336 Full Scale

Daniel Zanardi
Prodigy 40 points
Part Number: AMC1336
Other Parts Discussed in Thread: AMC3336,

Tool/software:

Hello , 

I have a simple question .

My system outputs a 0 / 2VDC, 2V is my full scale , is it possible to use an AMC1336 or AMC3336 to convert such amplitude ? ( datasheet says it woks between -1 to 1V)

Thx 

  • 0
    TI__Expert 8455 points

    Hi Daniel,

    Thank you for your question.

    It is definitely possible with some adjustments. The differential input voltage to the device is +/-1V as described below:

    The first option is to use a voltage divider. Divide the voltage in half so it is within the FSR of the device. Or, if your input range is 0-2V, you could shift your input down 1V so it swings from -1V to 1V.

    Please let me know if there are further questions.

    Best regards,
    Eva