• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 46 subscribers
  • Views 98 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

ADS1258: ADS1258 Register Read command question

Juan B
Prodigy 30 points
Part Number: ADS1258

Tool/software:

Hi

I am configuring the ADC in a certain way and I would like to be able to check the configuration I made.
For example, I set the MUXSG0 register as “10000001”, I want to see that configuration so I guess I should send a command for this with the register address, hoping that what I get back is that “10000001”....

I'm not sure if it's the Read Register Command = “010” having as Command “01000100”
What should I get as a response? how do I get those configuration values? simply "10000001"?

This for 1 specific register, but what about multiple register? whit MUL = '1'

  • 0
    TI__Mastermind 47261 points

    Hi Juan B,

    Please refer to Table 14 in the ADS1258 datasheet for instructions about commands, specifically the "Register Read Command"

    The MUL bit behavior is described below.

    Again, please read the datasheet, many of the questions you have asked already are answered in that document. I cannot explain it any better

    -Bryan