ADC3444: Configuration details of ADC registers

Pravin P

Part Number: ADC3444
Other Parts Discussed in Thread: DAC34SH84,

Tool/software:

Hi,

Is there any GUI tool or existing register values to configure the ADC3444 and DAC34SH84 register set? without register configuration, whether it will work with default values? whether register configuration is mandatory or not? What is the result of this device's default register mode?

11 months ago

0 Rob Reeder 11 months ago

TI__Mastermind 41180 points

Hi Pravin,

The following link is for the ADC3444, please down load this GUI.

ADC3444EVM Evaluation board | TI.com

For the DAC34SH84 use this link for the GUI:

DAC34SH84 data sheet, product information and support | TI.com

Regards,

Rob

0 Pravin P 10 months ago in reply to Rob Reeder

Prodigy 100 points

Hi Rob,

Thanks.

Can I measure the input voltage by observing the digital output (samples) produced by the ADC3444 after writing the following optimal register?

0 Chase W 10 months ago in reply to Pravin P

TI__Mastermind 23840 points

Hi Pravin,

Yes, these are the required register writes after power up (or reset) before the output data will be correct (and you can use to determine input voltage). If you are not going to use any additional features of the device, you don't need to do any additional register writes.

Thanks, Chase

Data converters

Data converters forum

ADC3444: Configuration details of ADC registers