• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 47 subscribers
  • Views 185 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

ADC101C021: How to working on fSCL = 3.4MHz?

Andy Lin
Prodigy 40 points

Part Number: ADC101C021

Tool/software:

Dear TI team:

About ADC101C021
If I want to working on fSCL = 3.4MHz, do I need to set up something? (ex:fIN?)
And if necessary, how to set it?



Thanks~

Best Regards,

Andy

  • +1
    TI__Mastermind 19900 points

    Hi Andy,

    Apart from setting the I2C bus speed on your MCU, you have to follow the sequence to tell the device to enter high speed mode. This is best described in page 25 of the datasheet. Let me know if you have any questions in regard to that.

    Regards,
    Joel