hello,
i am using AFE5804 EVM for Portable Ultrasound medical imaging.First thing i have to check the LNA CW output using Switch matrix.Please help me how initiate the registers using SPI.
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
hello,
i am using AFE5804 EVM for Portable Ultrasound medical imaging.First thing i have to check the LNA CW output using Switch matrix.Please help me how initiate the registers using SPI.
Deepan,
Reset device by writing 0[1]
Set the VCA control register to 0bxx000011 by writing 0x0003 to register 16. This should route Ch1 input to CW0.
Thanks,
Chuck Smyth
Thank you for your reply sir, I wrote that register as 0x0003 and i got the output, but its routing all eight input channels. That means it enables every input channels and gives output.