In the description of the 32-clock frame the datasheet shows a 33rd clock pulse before beginning a new conversion. I would like to know if I could begin a conversion immediately after the 32nd clock. Will this work?
This thread has been locked.
If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.
Hello Mark,
The minimum clocks required in 32 Clock mode is 30 Clks. But with 32 clk mode, time between two consecutive falling CS edges will be around 800ns and sampling speed of device will reduce to 1.25MSPS.
Regards,
Lokesh