SAMPLE CODE TO INTERFACE TO THE TLC3578 in burst mode

Harish Mahadevan

could you share/ post sample C code illustrating the communication sequence from a SPI microcontroller interface to the TLC3578 , for burst mode of operation involving acquisition and reading data from all the 8 channels , storing the conversion results in on-chip FIFO and reading the FIFO to acquire the data?

thanks in advance

over 10 years ago

0 Chinh Vu over 10 years ago

TI__Expert 6530 points

Harish,

I believe that the answer will be dependent on the Microcontroller that you have in mind. Have you already picked out a TI microcontroller? If so, i would suggest reposting to that forum.

For an overview of TI microcontroller products, please visit: http://www.ti.com/lsds/ti/microcontrollers_16-bit_32-bit/overview.page

0 Harish Mahadevan over 10 years ago in reply to Chinh Vu

Prodigy 20 points

Yes. I had posted in that forum but that post has been moved to the precision data converters forum.:). I assume the SPI Data interface being universal any sample controller interface code provided could be modified to my requirements. Even a DSP -SPI Interface protocol Would be useful

Because of the Thanksgiving holiday in the U.S., TI E2E™ design support forum responses may be delayed from November 25 through December 2. Thank you for your patience.

Data converters

Data converters forum

SAMPLE CODE TO INTERFACE TO THE TLC3578 in burst mode