ADC16DX370EVM and Xilinx ZC706 Evaluation kit

Kazuhiko Ogawa

Other Parts Discussed in Thread: ADC16DX370EVM

Hallo,

Our customer directly connects the ADC16DX370EVM and Xilinx ZC706 Evaluation kit, and is evaluating.
But JESD204 serial interface does not operate correctly, he said.
“ Is the TSW14J10EVM adapter needed in this case? “, he asked.
http://www.ti.com/tool/tsw14j10evm
Or, would this be Xilinx ZC706 setting issue?

Best Regards,
Kazu Ogawa

over 9 years ago

0 Joshua Carnes over 9 years ago

TI__Expert 4340 points

Hi Kazu

An FPGA image must be created for the ZC706 and this is not something that TI has generated at this time. We have created images for the KC705 (Kintex-7) and VC707 (Virtex-7). The TSW14J10EVM adapter can be used to load these images to the FPGA and pull data off the FPGA to be analyzed in HSDC Pro.

We may be able to supply the project package for the VC707 and re-target for the ZC706. Please let me know if this is something the customer would like to try.

Regards, Josh

0 Kazuhiko Ogawa over 9 years ago in reply to Joshua Carnes

Intellectual 985 points

Josh-san,
Could you please supply me the project package for the ZC706, if possible?
The customer requires it.Best Regards,Kazu Ogawa

0 Joshua Carnes over 9 years ago in reply to Kazuhiko Ogawa

TI__Expert 4340 points

Kazu,
You can find the firmware project on the TSW14J10 project page in the software section
http://www.ti.com/tool/tsw14j10evm?keyMatch=tsw14j10&tisearch=Search-EN
Regards, Josh

Because of the holidays, TI E2E™ design support forum responses will be delayed from Dec. 25 through Jan. 2. Thank you for your patience.

Data converters

Data converters forum

ADC16DX370EVM and Xilinx ZC706 Evaluation kit