Because of the Thanksgiving holiday in the U.S., TI E2E™ design support forum responses may be delayed from November 25 through December 2. Thank you for your patience.

  • State
  • Locked Locked
  • Replies 4 replies
  • Subscribers 46 subscribers
  • Views 336 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

adc08b200-q

james sullivan
Prodigy 35 points
 
ADC08B200Q
 1. Do you sell a demo board?
2. If no demo board is available can I use a "breakout" board mounted on a ground plane PCB for a prototype?
3. Page 9 of the data sheet specifies a typical RCLK clock rate of 2 Mhz to read the data buffer. How low of a clock rate can be used?
4. I need to sample at 200 MSPS. What oscillator part manufacturer and part number do you recommend for the data sheet application example shown on page 32 ?
 Thank you
j.l. sullivan