Hello,
I have a few questions about the ADC08351:
1.) How sensitive is V_A? Is it required to use a dedicated power source if there is only a single source on the board? Can it share the power supple with other devices? eg pulse laser, image sensor, etc ?
2.) Is there any offset to the Vp-p f? When I use a 2V power supply I get 2.04Vp-p as per the datasheet. However if my signal is 0.7V - 2.7V, is there anyway to achieve a 0.7V offset on the ADC Vp-p so that it can stay within the 2V Vp-p range but really range from 0.7V to 2.74V ?
3.) What is the max distance between the ADC input and the signal source that can be had WITHOUT a buffer?
Thanks!