ADS1248EVM-PDK / ADCPro WIn7 NI driver issue

Sebastian Schuster

Prodigy 70 points

Other Parts Discussed in Thread: ADCPRO

Hello,

I have an issue with the ADCpro installation and the NI drivers on my WIn7 64Bit PC.

I get the following error message: LabView Runtime-Engine

--> adcpro needs the LabView Runtime-Engine Version 2010

I installed the adcpro-setup-2.0.1.exe, the ads1248-adcproplugin-2.0.0.exe plugin and serveral NI drivers:

NIVISA1501full_downloader.exe

LVRTE2010sp1min64.exe

LVRTE2015f1_64bitstd.exe

NIs Measurement & Automation Explorer finds the following drivers:

What kind of installation driver is still missing? Or what went wrong during installtion?

Sebastian

over 9 years ago

0 Bob Benjamin over 9 years ago

TI__Guru** 113765 points

Hi Sebastian,

Welcome to the forum! I'm not sure why the runtime was not installed when you installed ADCPro. I see that you have the 64-bit version of the 2010 runtime, but because the application was built with Labview 32-bit, you will need the 32-bit version of the runtime for ADCPro to work. Make sure that you get the 32-bit version from NI. Also, you can use 2010, SP1 (32-bit). As another note, you are not required to uninstall the 64-bit version. You just need to make sure you add the 32-bit version.

Best regards,

Bob B

0 Sebastian Schuster over 9 years ago in reply to Bob Benjamin

Prodigy 70 points

Hello Bob,

it worked, thank you.

Sebastian

0 Bob Benjamin over 9 years ago in reply to Sebastian Schuster

TI__Guru** 113765 points

Hi Sebastian,

You are welcome and I'm glad you got it working. Feel free to post again if you have any other issues.

Best regards,

Bob B

Data converters

Data converters forum

ADS1248EVM-PDK / ADCPro WIn7 NI driver issue