• State Resolved
  • Locked Locked
  • Replies 3 replies
  • Subscribers 45 subscribers
  • Views 840 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

DAC8830 0.1Hz to 10Hz noise

cafain
Mastermind 6415 points
Other Parts Discussed in Thread: DAC8830

Hi,

Please tell me the noise of DAC8830.
DAC Output noise (Ta=25℃, 0.1Hz to 10Hz).

※Instead 10nV / rHz written in the data sheet,
  0.1Hz to 10Hz is the noise.

Best regards

  • 0
    TI__Genius 10615 points

    Hi cafain,

    My apologies, I don't think I understand your question. Could you please clarify?

    The datasheet lists the DAC output spectral noise density as 10 nV/√Hz. This is taken at 1 kHz.

    If you are interested in the noise amplitude at 0.1 to 10 Hz I can ask our characterization team to see if we have this data.

  • 0 in reply to Eugenio Mejia
    Mastermind 6415 points

    Hi, Thank you for your support.

    Description is sorry not in shortage.

    "Noise amplitude at 0.1 to 10 Hz" Would you please provide this data.

    Best regards

  • 0 in reply to cafain
    TI__Genius 10615 points

    Hi cafain,

    I had a discussion with the design team. Since this DAC is unbuffered, there is no component that would cause a 1/f noise which is usually what cause the increase in noise near DC.

    This means that you can use use the 1 kHz spectral noise to calculate the noise near DC, but it will be negligible since in the system the reference and the buffer amplifier that you select will have the larger noise injection into the system.

    In short, you can consider the REF_noise + OPA_noise = REF_noise + OPA_noise + DAC_noise from 0.1 to 10 Hz.

    I hope this helps. Please let me know if something is not clear.