Because of the holidays, TI E2E™ design support forum responses will be delayed from Dec. 25 through Jan. 2. Thank you for your patience.

  • State
  • Locked Locked
  • Replies 2 replies
  • Subscribers 46 subscribers
  • Views 484 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TSW1266

Girish T
Prodigy 155 points
Other Parts Discussed in Thread: ADS5402

Hi

I am working with TSW1266 receiver.

Kindly let me know how RF to IF conversion process taking place?

Can I change the IF  frequency in TSW1266?

Thanks a lot

Girish

  • 0
    TI__Genius 12965 points
    Girish,

    I'm not sure I understand your question? The input signal goes through an IQ demodulator which does a complex down conversion to an IF signal, then I and Q paths are then sampled by the dual input ADS5402 ADC.

    The output IF frequency is the difference between the input RF signal and the LO source. Your resulting IF frequency will depend on your frequency plan.

    If you have not already done so, Please have a look at the users guide and TI Design on the TSW1266EVM product folder for more detailed information.

    Ken.
  • 0 in reply to Ken C
    Prodigy 155 points
    Thanks

    One more query for TSW30SH84
    what is its trace noise
    Output power
    Source harmonics
    Power Sweep Range (ALC)
    and for TSW1266
    Receiver Dynamic Range
    0.1 dB Receiver Compression

    Kindly let me know, it will be great help.