This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Programming the ADC32J45 reset, sclk, sdata, and sen pins using the EVM

Other Parts Discussed in Thread: ADC32J45, ADC32J45EVM

I want to access the ADC32J45 part's sclk, sdata, sen, and reset pins to program the internal registers.  I want to do this through the Evaluation Module board's FMC connector. 

On page 12 of the schematic ADC32JXXEVM-SCH_C.pdf, I see the part 5M80ZT100 shown.  Is this the FMC connector on the EVM?