This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

ADS4229EVM: Cannot see digital data output at test points

Part Number: ADS4229EVM
Other Parts Discussed in Thread: ADS4229

I am using ADS4229 EVM. This is my test specifications:

Signal generator CH1: 800mV, 4MHz,Sine wave, 50 Ohms connect to ChA on ADS board (J6)

Signal generator CH2-Sync:  800mV, 8MHz, 50 Ohms connect to CLK on ADS board (J19)

Power supply 5V to ADS board

At J1 (Data out), I did not detect any signal. Please help  me debugging this problem. I was able to see input signal and clock coming into the board btw. Thank you.