This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

ADC32J44: How to configure K as 16

Part Number: ADC32J44

Hi,

My customer would like to configure K = 16. How to configure the value of Register 31h?

Thanks.

  • Jerry,

    Sorry for the late response.  Somehow this post was missed from 1 week ago.

    You can change the K values by enabling control K bit in register x2Bh, then setting the K value in register x31h

    Ken.

  • For further clarification the value of the K register is set as K-1, so in this case you can enable Ctrl-K, then set K register value = 15 for K=16.

    Ken