ADS1298R: ADS1298 small problem

Hello Pingyang,

This bit when cleared, will output data shifted in from the DAISYIN pin after the LSB of the data. If the bit is set, the device will just re-output the data from the same device starting with the status word.

If you plan on daisy chaining multiple devices together, clear this bit. If you are not daisy chaining devices and you think you would like to re-read a sample once you have already read it, then set the bit. Note, however, that you have a limited amount of time to shift out data before the next DRDY pin. Shifting out the same data twice has limited utility.

Brian