• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 45 subscribers
  • Views 949 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

ADS1248: SBAB144: ADS1x4x Firmware Example Code: A hardware information for the sample code ?

Hideaki Nambu
Mastermind 9125 points
Part Number: ADS1248
Other Parts Discussed in Thread: MSP-TS430PN80USB, , MSP-EXP430F5529LP

Hello,

Could you please tell me which hardware is good to try the titled sample code  ?

My best answer would be : To purchase MSP-TS430PN80USB and an ADS1248 IC sample, then build a base board to connect them.

  • 0
    TI__Guru** 112905 points

    Hello Hideaki,

    You could use the MSP430 hardware mentioned.  However, the code itself was developed using the Launchpad MSP-EXP430F5529LP.  You should be able to compile the project and run using this Launchpad.  There may be some slight modification required using the other hardware platform.

    You will need to create an interface board containing the ADS1248 to plug on the Launchpad.  If you use the same GPIO connections are used as in the firmware project the result should be easy to accomplish.

    Best regards,

    Bob B