Because of the holidays, TI E2E™ design support forum responses will be delayed from Dec. 25 through Jan. 2. Thank you for your patience.

  • State TI Thinks Resolved
  • Locked Locked
  • Replies 2 replies
  • Answers 1 answer
  • Subscribers 46 subscribers
  • Views 614 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

ADC78H90: ADC78H90

Kailyn Chen
Genius 9560 points
Part Number: ADC78H90

Dears;

   Many customers need ADC/DAC  source code or test code, I find that some of ADCs have demo board, some not have, or sometimes we could find the firmware in EVM product folder,  but most of the time, there is no reference code, for example, ADC78H90.etc. So could you please give me some advice?  Thank you 

Best regards

Kailyn

  • 0
    TI__Expert 3175 points
    Hi Kailyn,

    We are looking into this and will get back to you.
  • 0
    TI__Expert 3175 points
    Hi Kailyn,

    For most of our SAR ADCs we do not offer source code, and what we write for our EVMs is more complicated that is needed in a real system so it is close to unusable outside of controlling the EVM.

    That said, our SAR ADCs use standard communication protocols (SPI in the case of the ADC78H90) and we include all of the necessary timing specifications in the datasheet (see page 5 through 7 of the ADC78H90 datasheet). Those specifications can be used by any controller that has offers standard SPI.