• State TI Thinks Resolved
  • Locked Locked
  • Replies 5 replies
  • Answers 2 answers
  • Subscribers 47 subscribers
  • Views 900 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TSW1405EVM: TSW1405EVM : LabView

hyeonseok na
Prodigy 50 points

Part Number: TSW1405EVM

Hello

We want to control a TSW1405EVM(Data Converter EVM) with ADS4129EVM board using LabView(Ver. 2017) instead of TI's HSDC Pro software.
For this, we are hoping for obtaining a LabView library which serve USB protocol for TSW1405EVM.

best regards

  • 0
    TI__Genius 12780 points
    Hello,

    We are taking a look into this, and will be back with you soon.

    Regards,

    Dan
  • 0
    Prodigy 150 points
    Your problem is very close to mine, but I prefer to use Wolfram Mathematica for my projects. I hope TI will help us.
  • 0
    TI__Genius 12780 points

    Hi Hyeonseok,

    We currently support using HSDC Pro to capture data from our TSW140x EVMs. However, we have automation tools/examples that you can use for Labview, MATLAB and Python. So, this means that you can script/automate control of the TSW1405 with Labview, but you will still need HSDC Pro to capture data from the TSW1405. After HSDC Pro is installed, look at the folder "C:\Program Files (x86)\Texas Instruments\High Speed Data Converter Pro\HSDCPro Automation DLL\Manual and Examples" for files and documentation.

    Regards,

    Dan

  • 0 in reply to dBrock
    Prodigy 50 points

    Dear Dan
    Thanks for your kind reply.

    We tried to test LabView according to your advice.
    However, as far as we know, the LabView example in “HSDCPro Automation DLL” is just a controller which can control the behavior of HSDC pro software.

    We want to make a LabView program which can directly access to TSW140x through a USB cable.
    And then, we want to show the ADC output data (captured data) on a LabView window.
    We hope this series of work is possible without HSDC Pro software.
    Is it possible?

    If it is difficult, we hope at least that the HSDC Pro software is not visible on the PC screen.
    In other words, we strongly hope that at least the captured data can be displayed on the LabView screen.

    Best regards,

  • 0 in reply to hyeonseok na
    TI__Genius 12780 points
    Hi Hyeonseok,

    Unfortunately, we do not offer support to directly capture data from the ADC without the use of HSDC Pro. Our other tools (Labview,MATLAB,etc..) mainly serve to automate data capturing through the use of HSDC Pro. I would assume that it is possible to create this kind of functionality, but our software tools do not currently support it.

    Regards,

    Dan