I am having trouble routing the CLKOUT signal from the ADC board to the ZC706 board and using it as a clock.
The pins I am interested are shown here on the evm,
Then routed to the FMC ADC adapter board
Which routes to a non-clock pin on the ZC706
V23 IO_L24P_T3_13 3 13 NA NA HR NA W24 IO_L24N_T3_13 3 13 NA NA HR NA
However the DA5(on the EVM) does route to a clock capable pin,
Is my understanding of all this correct?
I my intention was to drive my FPGA with the the output clock from the ADS board.