Because of the Thanksgiving holiday in the U.S., TI E2E™ design support forum responses may be delayed from November 25 through December 2. Thank you for your patience.

  • State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 46 subscribers
  • Views 1889 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TLC3578 using problem

Jong koog Kim
Prodigy 20 points
Other Parts Discussed in Thread: TLC3578

I am using TLC3578 AD converter.
In AD value to be gotten to read, Clock happens in AD Channel terminal, I want to know what is problem.

I will ask reply to mail.
Kjk9blue.at.hotmail.com

  • 0
    TI__Guru**** 174226 points

    Hi Kjk9blue,

    Please provide a timing diagram showing your SCLK, SDI, SDO and the relationship of these signals to the chip select. Tell us what you are sending as a command into the ADC and what data you receive from the ADC.  Please also explain how you initialize the device and if possible, provide a schematic diagram showing the connections around the ADC and the controller.