AMC7834EVM: AMC7834EVM

omid fanaian

Part Number: AMC7834EVM

I'm loading the AMC7834EVM support software but I get stuck with the "Loading Main.vi" message in the title screen and it just stays there.

Using Windows 10.

Suggestions anyone?

over 5 years ago

0 Paul_Frost over 5 years ago

TI__Guru 52663 points

Hi Omid,

Can you confirm that you have the SDM-USB-DIG plugged in to the computer? Does the device get detected?

Thanks!

0 omid fanaian over 5 years ago in reply to Paul_Frost

Prodigy 40 points

Hi Paul, yes I have tried it with the USB plug and it does get detected as a COM port. I have tried it without the USB as well, and get the same frozen startup screen each time.
Thanks
Omid

0 Paul_Frost over 5 years ago in reply to omid fanaian

TI__Guru 52663 points

In you Device Manager window, what does the SDM-USB-DIG detect as?

Also, please try installing the file from this link: e2e.ti.com/.../442674

Thanks!
Paul

0 omid fanaian over 5 years ago in reply to Paul_Frost

Prodigy 40 points

It was detected as a generic COM device. After installing the driver you suggested it enumerates as a TI MSP430 COM device.

The behavior of the AMC7834EVM software hasn't changed. It still loads with the same message and then locks up.

0 Paul_Frost over 5 years ago in reply to omid fanaian

TI__Guru 52663 points

Hi Omid,

I have verified that the software runs on Windows 10 PCs. Can you check if you have any firewall or antivirus protection software that could be preventing the software from running?

Thanks!
Paul

0 BCowdin over 5 years ago

Prodigy 10 points

I am having the same issue

0 omid fanaian over 5 years ago in reply to Paul_Frost

Prodigy 40 points

My system is using the standard Windows Defender, and I have tried disabling the firewall and get the same results. There may be other protections on my system which are locked because of corporate policy, but if there is something specifically in firewall settings that needs to be turned on or off then I can try it as well.

0 Paul_Frost over 5 years ago in reply to omid fanaian

TI__Guru 52663 points

Hi Omid,

Can you try the software on another PC? We have had a few questions in the last few weeks about this issue. In general we have found that there is some other piece of software that is blocking operation.

Thanks!
Paul

Data converters

Data converters forum

AMC7834EVM: AMC7834EVM