This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

ADC12J4000: RFSDK : Playback Status not started

Part Number: ADC12J4000
Other Parts Discussed in Thread: RFSDK, TCI6636K2H, , 66AK2L06, DAC38J84

Hello I am Seunggu Jeong.

I used RFSDK GUI. but It is not working..

I know that what error is.

error :

 Playback Status is not started.

 And The Radio is not On..

So i entered a command :

mpmcl run dsp0

run failed (error : -100)

What is meaning about Playback??

And i want to fix this error.

Please help me..

  • Hi Seunggu
    I have notified the RFSDK team regarding your question. Someone will provide a more detailed response soon.
    Best regards,
    Jim B
  • Hello,

    RFSDK1 which uses the TCI6636K2H device is no longer supported. It was replaced by RFSDK2 ( http://www.ti.com/tool/RFSDK ) which uses TCI6630K2L.

    Regards,
    John
  • Hello

    I am not use TCI6636K2H

    My board is 66AK2L06 and ADC12J4000

  • The "66AK2L06 DSP+ARM Processor with JESD204B Attach to Wideband ADCs and DACs" TI Design which uses RFSDK2 can be found at the following link.
    www.ti.com/.../TIDEP0034

    The Getting Started Guide on that page lists the requirements for running the demonstration (copied below) and also gives step-by-step instructions for running the demo. Please verify that all hardware (including K2L-HSP FMC Adapter and DAC38J84) and software requirements are present and that all instructions have been followed.

    The Playback software is described in the RFSDK2 user guide.

    Regards,
    John


    2.1 Required Hardware and Software Components

    Hardware Components

    • The 66AK2L06 EVM, rev. 3.0, with the following accessories:
    – A 12-V power supply
    – A mini-USB cable for a UART connection
    – An Ethernet cable

    • The K2L-HSP FMC Adapter Rev.A with the following accesories:
    – A mini-USB cable to connect with a PC

    • The DAC38J84, rev. D, with the following accessories:
    – A 5-V DC power supply
    – A mini-USB cable for connection with a PC

    • The ADC12J4000 EVM with the following accessories:
    – A 5-V DC power supply
    – A mini-USB cable for GUI SPI program
    – An ADC-WB-BB EVM with short marching-length SMA (male) cables

    • DC-264 MHz low-pass filter

    • 4 SMA cables

    Software Components

    The demonstration package is a Windows® installer executable. Running this installer on the Windows
    host extracts the software components per the following directory structure:
    • RFSDK2 <latest_version> Top level directory includes:
    – RFSDK2 <latest_version>-full-bin.tar.gz: Demo package to be installed on top of MCSDK 3.1.4.7 on
    66AK2L06 EVM
    – RFSDK2 <latest_version>-66AK2Lx-Design-Demo-Win-GUI-Configs.zip: Board initialization and
    configurations files for ADC12J4000 and DAC38J84 EVM GUIs
    – mcsdk314_rfsdk.tar.gz: MCSDK patches for the demo
    – RFSDK2 <latest_version>-doc.tar.gz: Documentation and Release notes
    • Configuration GUIs for data converter EVMs (Windows-based)
    – ADC12J4000 EVM GUI
    – DAC38J84 EVM GUI