Hello,
My customer is using ADC12J2700. To confirm configuration I/O operation, they read the following register values:
Reg 0x003 (Chip type): 0x03 (expect 0x03)
Reg 0x006 (Chip version): 0x03 (expect 0x13)
Reg 0x00C-D (Vendor ID): 0x0451 (expect 0x0451)
On the data sheet they are using (doc SLAS969D -- January 2014, revised October 2017), page 61, where the value expected in reg 0x006 (chip version) is 0x13, not 0x03. Is there a possible error in the datasheet for Reg 0x006? i wanted to confirm if 0x13 is the expected value.
Thank you!
Errol Leon
Texas Instruments
Field Application Engineer