ADS1263EVM-PDK: ADS1263EVM-PDK

user5760626

Part Number: ADS1263EVM-PDK
Other Parts Discussed in Thread: ADS1263,

Hello,

We have 2 ADS1263 card and we want to use both of them in the same time but when we plug the USB's our computer see both as USBStyx with no difference in details. How can we fix this problem and work with 2 card simultaneously?

Regards.

Uğur Karadeniz

over 5 years ago

0 Tom Hendrick over 5 years ago

TI__Guru**** 168485 points

Hi Ugur,

Unfortunately you will need two PCs to run two ADS1263EVM-PDK setups at the same time, or you would have to write your own code to accommodate this. The PDK (Performance Demonstration Kit) software was written assuming one device was being evaluated.

0 user5760626 over 5 years ago in reply to Tom Hendrick

Prodigy 40 points

Hi Tom,
Thanks for the information. We only work with the labview until this time. Do you think labview enough for it or we need to use matlab or C to create the code which will solve our problem?

Regards,

Uğur

0 Tom Hendrick over 5 years ago in reply to user5760626

TI__Guru**** 168485 points

Hi Ugur,

You will have to get the ADS1263EVM running with your own code/controller. The USB chain from the PC to the EVM is not going to support two concurrent instances of the software that we provide in the kit.

0 user5760626 over 5 years ago in reply to Tom Hendrick

Prodigy 40 points

Hi Tom,

Is it possible to create and control communication between two cards via mbed? Do you have any experience about on that topic or do you know any example on it?

Regards,

Uğur