ADS5282: ADS5282 along with FMC-ADC adapter in spartan 6 device

Chinedum Onyekwelu

Part Number: ADS5282

I am working on a project that involves SP605 xilinx eval board and an ADS54RF63EVM ADC eval module (along with the ADC to FMC passive adapter board). I'd like to capture ADC output and send it out of the gigabit ethernet interface on the sp605. Would the code you are providing here help with that? Could you please send it to me so I can evaluate it? Thank You all in advance

over 5 years ago

0 dBrock over 5 years ago

TI__Genius 12780 points

Hi Chinedum,

Please look at this thread for links to Xilinx Firmware examples.

e2e.ti.com/.../2294225

Best Regards,

Dan

0 Chinedum Onyekwelu over 5 years ago in reply to dBrock

Prodigy 60 points

Hey Dan, I put the wrong part number into the Description the EVM the we are using is the ADS5282, also the Xilinx page is not allowing me to download the content that you tagged in your response. thank you for your time.

0 dBrock over 5 years ago in reply to Chinedum Onyekwelu

TI__Genius 12780 points

Hi Chinedum,

Unfortunately, I am not aware of any TI reference designs (high speed data converters) that utilize the Spartan series.

The only thing I could point you to is one of our designs used for the TSW14J10EVM.

www.ti.com/.../tsw14j10evm

There is source code here that you may be able to use (bottom of the page), but this is most useful for the JESD data interface, and doesn't route to ethernet.

I would check with Xilinx to see if they have any useful examples.

Best Regards,

Dan

Data converters

Data converters forum

ADS5282: ADS5282 along with FMC-ADC adapter in spartan 6 device