• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 46 subscribers
  • Views 876 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

AFE4404EVM: Using BMA280 accelerometer

Juliane Bauer
Prodigy 10 points
Part Number: AFE4404EVM
Other Parts Discussed in Thread: AFE4404,

Hello,

I'm working for my Master Thesis. Therefore I use the AFE4404 EVM with the option of the accelerometer BMA280. But I have Problems to get the data of the accelerometer.

Is it possible to get the data from the AFE4404 EVM GUI?

If not, please tell me where I have to change the c-code. Or could you send me the changed files?

Regards

Juliane

  • 0
    TI__Genius 12575 points
    Hi Juliane,

    AFE4404EVM's GUI doesn't support data acquisition from the accelerometer.
    You have to modify firmware of the EVM as well as use/develop some other software such as MATLAB or Python to acquire all the data.

    Regards,
    Prabin