• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 46 subscribers
  • Views 242 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TLA2021: Resister setting of changing Continuous-conversion mode

Y.Ottey
Mastermind 6145 points
Part Number: TLA2021

Dear all,

Would you mind if ask for TLA2021?

Out customer would like to know about resister setting of changing Continuous-conversion mode.

Please answer questions below.

 

If I change setting of Configuration Register (RP = 01h) in order to change "Continuous-conversion mode" of Operating Mode, do I need to write a 1 to the OS bit (bit 15 of Configuration Register) ?

 

It would be great if you could let me know your thoughts on the following the question.

Best regards,

Yu Ohta

  • 0
    TI__Guru* 94515 points
    Ohta-san,


    My understanding of this device is that the OS bit (bit 15 of the Configuration register) is only affected by a write when the device is in single-shot conversion mode to start a conversion.

    When the device set to continuous conversion mode (MODE bit set to 0), the device is on. You do not need to write a 1 to the OS bit.


    Joseph Wu