Part Number: TSW14J56EVM
Hi Team,
I received the following request, can you help me?
######################################################
I need a digitizer to collect RF signals. From Texas Instrument (TI) website, I found a “digitizer” board (TSW54J60EVM - http://www.ti.com/tool/tsw54j60evm). In order to capture signals with this board, a “data capture” board is needed. From TI website, I found two “data capture” boards. One of them is TSW14J50EVM (http://www.ti.com/tool/tsw14j50evm) and the other one is TSW14J56EVM (http://www.ti.com/tool/TSW14J56EVM). Although there is huge price difference between these 2 boards, it seems that the only difference between these two boards is data transferring rate.
Are these two “data capture” boards compatible with the digitizer (mentioned above) board?
Is there a significant difference between these two “data capture” boards?
If we buy one of these “data capture” boards, do we have to pay fee for the software (High-speed data converter pro software) which is descripted in the datasheet of “data capture” boards?
Is there any thresholding/edge detection ability of this system (digitizer, data capture board and software)?
While we are collecting data, are we going to press run/stop button or can we set edge detection?
######################################################
Regards,
Fabio