This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

AMC1304M25: PIN 1 = NC, but connected in TIEVM-HV-1PH-DCAC

Part Number: AMC1304M25

Hi There,

I've noticed that in the TI EVM-HV-1PH-DCAC design there is an AMC1304 SDFM chip that has Pin 1 connected to 5V via a 1.1ohm resistor.

The datasheet for the AM1304 says this pin is NC.

I hunted throught he datasheet but could not find a reference to this.

Please advise if this resistor should be there or not?