This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

AMC1303M0510: Replace from AMC1303M2510 to 0510

Part Number: AMC1303M0510
Other Parts Discussed in Thread: 100A

Hi,

Our customer is considering change from M2510 to M0510.

Customer's Existing model : +/-100A FS, 2m ohm shunt --> +/- 200mV( 4/5 FS of  M2510 )

So, I think they should use 0.4m ohm shunt for M0510.    (100A * 0.4m ohm = 40mV)

It is correct ?

This is a simple question, but they evaluated it using "0.5"m ohm shunt and it didn't seem to work properly.

If we make the input FS of this device the same, can we replace it directly?
(If not consider noise)

Best regards,
Hiroshi