ADS4246: Request a Design Review

Louis Han15

Genius 4680 points

Part Number: ADS4246

Hello

I Request a Design Review for ADS4246

Operation Condition

Input Freq : 75Mhz

Sampling Rate : 100Msps

Bandwidth : 20Mhz

Please Check the Schematic.

ADS4246.pdf

Best regards.

over 5 years ago

0 Ebenezer Dwobeng over 5 years ago

TI__Genius 9695 points

Hi Louis,

We will get back to you after the review is completed.

Thanks,

Eben.

0 Louis Han15 over 5 years ago in reply to Ebenezer Dwobeng

Genius 4680 points

Hi Eben

When can I get a review?

Thanks.

Best Regards.

0 user4090349 over 5 years ago

Intellectual 811 points

If the sampling rate is 100Msps, it could only reconstruct 50MHz signal.

Is it OK for you?

0 Louis Han15 over 5 years ago in reply to user4090349

Genius 4680 points

Hi Eben

it's OK because Bandwidth is 20Mhz.

Regards.

0 Ebenezer Dwobeng over 5 years ago in reply to Louis Han15

TI__Genius 9695 points

Hi Louis,

For the design review you can refer to the following resources:

1) EVM schematics: http://www.ti.com/lit/zip/slac459

2) Pin functions table in the datasheet.

Thanks,

Eben.

0 Louis Han15 over 5 years ago in reply to Ebenezer Dwobeng

Genius 4680 points

Hi Eben

We designed the circuit based on the EVM schematics.

We will request a design review before production.

Best Regards

0 Kang Hsia over 5 years ago in reply to Louis Han15

TI__Guru 72329 points

Hi Louis,

Eben will be out of office for next few weeks. I see that the forum posts indicates the issues have been closed. I will close this for now. If you need anything, you may start a new post anytime. Thanks.

-Kang

Data converters

Data converters forum

ADS4246: Request a Design Review