• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 46 subscribers
  • Views 248 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TSW54J60EVM: Swapping OUT+ and OUT- on the LMH3401

charlesw
Intellectual 800 points
Part Number: TSW54J60EVM
Other Parts Discussed in Thread: ADS54J60, LMH3401, LMH5401

Hello,

I noticed that you swapped OUT+ and OUT- on the LMH3401 after the filter. OUT+ goes to AINM and OUT- goes to AINP. It looks like you did this for layout purposes to avoid putting vias in the signal path. My question is what affect will this have on the digitized signal from the ADS54J60? I assume it will be phase shifted 180 degrees?

Any thoughts on this would be appreciated. I'm about to do a layout with an LMH5401 and ADS54J60 and the question came up.

Thanks!