ADS1299: ADS1299 software drivers

user6113615

Part Number: ADS1299

I'm also trying to install the ADS1299 software in windows 10 and I had already download it, but just it. I dind't installed the drivers because I couldn't find them. Theoretically, when I plug the board for the first time the drivers will apear to install, won't them?

So, my appointments are:

1. The drivers are just the USBStyx and MMB0 (NI-VISA) ones?

2. How do I find them to install?

If you have the drivers, I would be grateful if you could put them availables here.

Thank you!

over 6 years ago

0 Alexander Smith over 6 years ago

TI__Guru 55062 points

Hi,

You need to download the "ADS1299EEGFE-PDK-SW, Software for the ADS1299EEGFE-PDK" located here: http://www.ti.com/tool/ADS1299EEGFE-PDK

Once this has been downloaded, run the download to install the drivers and software.

For clarification, please see section 3 of the user's guide for software installation. Please note that if you plugged the board in prior to installing the software correctly, you will need to un-install the software and start over. You will also need to install as an administrator. http://www.ti.com/lit/ug/slau443b/slau443b.pdf

From here, you should be able to see the board enumerating in device manager to ensure everything installed correctly.

Please see this thread for an example of a device that is correctly enumerating: https://e2e.ti.com/support/data-converters/f/73/t/743115

3 Software Installation

Data converters

Data converters forum

ADS1299: ADS1299 software drivers