This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

ADC10D1500RB: Is the non-rectaugular type is new model?

Part Number: ADC10D1500RB

Hello, TI specialists.

Since I closed the question ADC10D1500RB: Hardware error occured: WvBoardEnum call returned 'false', I got a new ADC10D1500RB from the authorized distributor for replacement.
But we met exactly same trouble as before.

We could use ADC10D1500RB successfully few years ago.
So we suspect if the new type we got this time had some trouble.

The one we got few years ago was rectangular board as shown in TI store.
This time we tested 2 non-rectangular board as shown in the attached figure.

We could not find any information about this non-rectangular ADC10D1500RB.

Now, our question is that does this type of board is the correct ADC10D1500RB?
Is there anyone who could use this new type board correctly?

Best regards,
Hiroaki Yano