• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 46 subscribers
  • Views 258 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Original question:

ADS8328 SDO pin is occilate oscillate after CS is LOW

ADS8323EVM: ADS8323 EVM Test base board and user GUI

Steven Liu1
Expert 4380 points

Part Number: ADS8323EVM

Hi Team, 

My customer is using ADS8323 for their application 10 years ago. And now we met some issue and need EVM for debugging. 

I've applied the ADS8323 EVM but no base board information. http://www.ti.com/tool/ADS8323EVM

I'd like to ask for your help to confirm whether the 5k 6k interface board is the base board that can be used for the ADS8323 debugging? 

And is there any user GUI can be used to tell out the ADS8323 sampling result? The reason for my asking is that I saw there is a DSP in the 5k-6k interface board, but it would be very hard to read the data out before my learning C5000/6000. 

http://www.ti.com/tool/5-6KINTERFACE

  • 0
    TI__Guru**** 168335 points

    Hi Stephan,

    Unfortunately there is no current software or GUI environment associated with the ADS8323EVM.  At the time this board was released (July 2002), we still had the 'Data Converter Plug-In Tool' which worked with Code Composer Studio up until version 3.3.  From there, CCS went to an Eclipse based code structure and the DCP Tools went obsolete.  The 5-6K Interface board was part of that setup which used the TMS320C6711, TMS320C6713 and TMS320C5509 DSK hardware.