CCS/ADS8866: Readout converting data from ADS8866 via SPI protocol by MSP430FR2311

Daojia Wei

Part Number: ADS8866
Other Parts Discussed in Thread: TIDA-01469

Tool/software: Code Composer Studio

Hi,

I want to get a program about data transmission between ADS8866 and MSP_EXP430FR2311 via SPI protocol. The MCU (MSPFR2311) just need readout the converting data from ADS8866. I am a new learner and not familiar with MSPFR2311.

Thanks a lot.

over 5 years ago

0 Daojia Wei over 5 years ago

TI__Prodigy 80 points

Hi,

Add one circumstance: I want to adopt 3-wires CS mode which DIN is connected to AVDD.

0 Collin Wells over 5 years ago in reply to Daojia Wei

TI__Guru 62975 points

Hello,

We don't provide processor specific driver code for our ADCs. The ADS8866 was used in a reference design (TIDA-01469) and the design firmware can be found on the ADS8866 product folder in the "Design resources" tab which should provide a good starting point for you.

http://www.ti.com/product/ADS8866#design-resources-for-you

Software

TIDA-01469 Firmware

TIDCDT6

Data converters

Data converters forum

CCS/ADS8866: Readout converting data from ADS8866 via SPI protocol by MSP430FR2311